This procedure is unsupported.Articles in the "Unsupported Community Documents" space are not supported by ITRS support.
This article was written for version 0.4.4 of NSClient++. Versions 0.3.x and earlier of NSClient++ did not rely on the Windows Registry as heavily, so these notes would not apply. These instructions should work on later versions unless otherwise noted.
If you already followed the HOWTO Certificate based TLSv1+ encryption with NSClient++, adding a further security step (certificate authentication) is a breeze.
Equivalent setup is possible with NRPE >= 3.0.x instead of NSClient++ on the monitored host side.
With this there's 3 options of certificate authentication.
- Authenticate the OP5 Monitor client (check_nrpe) - verify mode - peer-client with NSClient++
- Authenticate the monitored host (NSClient++) - -A /path/to/my_CA_cert.pem with check_nrpe
- Authenticate both ways
- NSClient++ 0.4.x or newer
- check_nrpe 3.0.x or newer
- CA certificate and client certificates generated based on this CA (see Create a self-signed CA & client certificate with OpenSSL)
Since the monitored host with NSClient++ is the server in the relationship with check_nrpe, we wan't to verify the client before we reveal our inner secrets (checks and performance data).
In the encryption HOWTO I mentioned using a CA certificate which will come in handy now, because now It's only 1 option change in NSClient++ to add certificate authentication.
To activate verification (certificate authentication) of the client (check_nrpe) all we need to do is change verify mode option in NSClient++.
This setting is located at /settings/NRPE/server within NSClient++ settings structure. Registry path: [HKEY_LOCAL_MACHINE\SOFTWARE\NSClient++\settings\NRPE\server]
|Settings name||Recommended value||Default value|
Simple explanation of the option:
verify mode - Comma separated list of verification flags to set on the SSL socket.
none - No verification is made
peer - NSClient++ sends client certificate request to the client (check_nrpe) and the certificate returned (if any) is checked against CA certificate.
fail-if-no-cert - Terminate the SSL handshake if no client certificate is returned
peer-cert - Alias for peer + fail-if-no-cert
Since we're using peer-cert we're both require the return of a client certificate and we verify that it's valid against the CA certificate.
In the other HOWTO about encryption, we didn't need to specify anything regarding encryption with check_nrpe. Now we have the possibility to both present our own client certificate so NSClient++ will accept us (verify mode - peer-cert), but also to verify the host / NSClient++ if we like, so a 2-way authentication.
First of all, because of the change within NSClient++ settings above, the following option flags are required with check_nrpe to be able to establish communication to the monitored host (NSClient++).
|./check_nrpe_v3 -H HOSTNAME/IP -C /path/to/my_client_cert.pem -K /path/to/my_client_key.key -c CheckCPU -a ShowAll=long MaxWarn=80% MaxCrit=90%|
This requires that you've generated a certificate for your OP5 Monitor server, running this check, and with -C & -K you're telling check_nrpe where your client certificate with private key are.
Now when you do a check against the host, NSClient++ will request a client certificate from check_nrpe, which we give, and then NSClient++ will verify it against it's CA certificate that we specified in the other HOWTO.
To take this one step further, we can verify the certificate on the host with NSClient++ as well when doing a check_nrpe request. This requires that the CA certificate is available on the OP5 Monitor server as well, and we add one more options flag to the check_nrpe command.
|./check_nrpe_v3 -H HOSTNAME/IP -A /path/to/my_CA_cert.pem -C /path/to/my_client_cert.pem -K /path/to/my_client_key.key -c CheckCPU -a ShowAll=long MaxWarn=80% MaxCrit=90%|
This will be the equivalent of verify mode option peer-cert in NSClient++, if the client certificate & key from NSClient++ doesn't match the CA certificate, the handshake fails and connection is dropped.
Please sign in to leave a comment.