Why doesn't the value of my generic and locally configured CPU utilization samplers match?

The content of this FAQ has been updated and migrated to the following topics in docs.itrsgroup.com. Refer to the following:

https://docs.itrsgroup.com/docs/geneos/4.12.0/Netprobe/system_hardware/hardware.html#View_(Linux)

Below info is from earlier FAQ article:

It is possible that the CPU value already changed when the second sampler took a "sample". And even if you make the sampling time the same, it is still possible that there is a difference in values because they don't sample simultaneously, there is a few milliseconds difference. So if the CPU utilization changes rapidly, there could still be a difference in values between the 2 samplers.

Articles in this section

Why doesn't the value of my generic and locally configured CPU utilization samplers match?

The content of this FAQ has been updated and migrated to the following topics in docs.itrsgroup.com. Refer to the following:

We recommend that you always use the latest document version in https://docs.itrsgroup.com/ to keep you up-to-date.

Comments

Articles in this section

The content of this FAQ has been updated and migrated to the following topics in docs.itrsgroup.com. Refer to the following:

We recommend that you always use the latest document version in https://docs.itrsgroup.com/ to keep you up-to-date.

Related articles